Now Current setup A home base station in North Queensland, built mostly from second-hand and hand-me-down gear. It's VHF and UHF for now, with a pair of Tait commercial radios doing most of the work. The base radios all run off one shared Diamond GZV4000D 40 A power supply.
Radios Tait TM9400 The 2m workhorse. Handles amateur FM and P25, plus marine VHF. It shares the Diamond vertical with the TM8250.
Type Mobile
Band VHF, 136–174 MHz
Output 25 W
Modes FM, P25
Channels Local 2m repeaters
Antenna Diamond dual-band vertical on an old satellite dish mount
Head Large control head, external speaker Tait TM8250 The 70cm rig, mostly on local repeaters. It also covers UHF CB.
Type Mobile
Band UHF, 400–470 MHz
Output 25 W
Modes FM
Channels Local 70cm repeaters, UHF CB
Antenna Shares the Diamond vertical through a triplexer
Head Hand-held control head, external speaker AnyTone AT-778UV Dual-band mobile on its own antenna.
Type Mobile
Band 2m / 70cm
Output 25 W
Modes FM
Channels Local repeaters, VFO
Antenna Nagoya dual-band whip on a mag mount on the Colorbond flashing Quansheng UV-K5(99) Handheld for getting on air away from the base station.
Type Handheld
Band 2m / 70cm
Receive Airband (AM) and FM broadcast, receive only
Output 5 W
Modes FM
Channels Local repeaters, VFO
Firmware F4HWN Kenwood R-1000 Classic general-coverage communications receiver.
Type Receiver
Receive 200 kHz – 30 MHz
Modes AM (wide and narrow), SSB
Antenna None yet Yealink T48G Desk phone set up for ham over IP.
Type IP phone
Modes Digital On air 2m FM 2m P25 70cm FM Marine VHF UHF CB Ham over IP
Local repeaters Most time on air is spent on local 2m and 70cm repeaters. When home, the radios are usually on and scanning the local repeaters. A casual weekly net on the repeater. Digital P25 talkgroups through local repeaters. A call usually goes out on the P25X network via VK4RSA in the afternoon or evening. Ham over IP from the desk phone. Club Member of M.A.R.A Inc (VK4WIM). Next What's planned A station is never really finished. Here's what's on the list next.
Get on HF Find a cheap second-hand HF radio locally. Build an HF antenna that fits the yard. Antenna for the Kenwood Put up a wire antenna for the Kenwood R-1000 receiver. Standard licence Upgrade from Foundation to Standard. Radios in the ute A second TM9400 and TM8250 are ready to go in, both with hand-held heads. They'll share a Diamond NR-770HSP through a diplexer. Portable station Set up a portable station for events and POTA/SOTA activations. Fix the old CB There's also an old Thorn 1503 27 MHz CB in the shack, modded to 40 channels from the dial. It's not working right now and needs to be fixed up. Once it's working again, it'll get a proper 27 MHz antenna in place of the temporary mag-mount whip.